mad-user

mad-user@lists.mars.org

303 discussions

hd audio
by Regina Davis 29 Nov '07

29 Nov '07

Hi, I am currently using madplay functions to play MP3 voice messages in our product that runs on a PC motherboard. This is in an RTOS embedded environment not windows. Recently the motherboards have a high definition audio chip on them instead of the ac97. Is there support for this? What are my options? Currently the initialization is returning the device not found error. Thanks, Regina ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________

1 0

mad decoder sample rates
by Steve Spano 07 Sep '07

07 Sep '07

Hi Folks, We have the mad library running on the new STR912 processor; 96MHz ARM9 core. We are using a small CPLD to bridge between the SSP serial port and a CS4431 stereo dac. We have an I2C silicon oscillator being used so we can set any sample rate we want. Currently, its working at 22.05KHz. We haven't change the sample rate yet. I want to be able to run 8Khz to 48KHz MP3s. Is there anything in the mad decoder that would prevent decoding MP3s within this range? We don't have a sample issue with our hardware since we can set any sample rate we want. Thanks Steve Spano, President steve(a)fl-eng.com Finger Lakes Engineering 607-277-1614 x223 www.fl-eng.com <http://www.fl-eng.com/>

2 2

Compiling LIBMAD for ARM
by Karthika 02 Apr '07

02 Apr '07

Helloo, I am trying to compile LIBMAD for ARM7TDMI on Metrowerks Codewarrior tool. The processor specific options for ARM are present in the file fixed.h. I have taken those options which are specific for ARM and included them in a new header file called "asm.h" ( given below).I have included this "asm.h" file in my project. Then, I have removed fixed.h from my project. Now, when I compile my project I get the errors for mad_f_mul and MAD_F_MLA. MAD_F_MLA error is only for III_alias reduce( ) function. A few errors are given below. Error : #29: expected an expression layer3.c line 934 return frac ? mad_f_mul(requantized, root_table[3 + frac]) : requantized; Error : #18: expected a ")" layer3.c line 1591 MAD_F_MLA(hi, lo, -b, ca[i]); Error : #18: expected a ")" layer3.c line 1596 MAD_F_MLA(hi, lo, a, ca[i]); Error : #29: expected an expression layer3.c line 1647 m0 = mad_f_mul(a17, -c3); The "asm.h" file I have included is as follows. # define MAD_F_SCALEBITS 28 # define MAD_F_FRACBITS 28 # define MAD_F(x) ((mad_fixed_t) (x##L)) # define MAD_F_MIN ((mad_fixed_t) -0x80000000L) # define MAD_F_MAX ((mad_fixed_t) +0x7fffffffL) # define MAD_F_ONE MAD_F(0x10000000) # define mad_f_tofixed(x) ((mad_fixed_t) \ ((x) * (double) (1L << MAD_F_FRACBITS) + 0.5)) # define mad_f_todouble(x) ((double) \ ((x) / (double) (1L << MAD_F_FRACBITS))) # define mad_f_intpart(x) ((x) >> MAD_F_FRACBITS) # define mad_f_fracpart(x) ((x) & ((1L << MAD_F_FRACBITS) - 1)) /* (x should be positive) */ # define mad_f_fromint(x) ((x) << MAD_F_FRACBITS) # define mad_f_add(x, y) ((x) + (y)) # define mad_f_sub(x, y) ((x) - (y)) # define mad_f_mul(x, y) \ ({ mad_fixed64hi_t __hi; \ mad_fixed64lo_t __lo; \ mad_fixed_t __result; \ asm ("smull %0, %1, %3, %4\n\t" \ "movs %0, %0, lsr %5\n\t" \ "adc %2, %0, %1, lsl %6" \ : "=&r" (__lo), "=&r" (__hi), "=r" (__result) \ : "%r" (x), "r" (y), \ "M" (MAD_F_SCALEBITS), "M" (32 - MAD_F_SCALEBITS) \ : "cc"); \ __result; \ }) # define MAD_F_MLX(hi, lo, x, y) \ asm ("smull %0, %1, %2, %3" \ : "=&r" (lo), "=&r" (hi) \ : "%r" (x), "r" (y)) # define MAD_F_MLA(hi, lo, x, y) \ asm ("smlal %0, %1, %2, %3" \ : "+r" (lo), "+r" (hi) \ : "%r" (x), "r" (y)) # define MAD_F_MLN(hi, lo) \ asm ("rsbs %0, %2, #0\n\t" \ "rsc %1, %3, #0" \ : "=r" (lo), "=r" (hi) \ : "0" (lo), "1" (hi) \ : "cc") # define mad_f_scale64(hi, lo) \ ({ mad_fixed_t __result; \ asm ("movs %0, %1, lsr %3\n\t" \ "adc %0, %0, %2, lsl %4" \ : "=&r" (__result) \ : "r" (lo), "r" (hi), \ "M" (MAD_F_SCALEBITS), "M" (32 - MAD_F_SCALEBITS) \ : "cc"); \ __result; \ }) mad_fixed_t mad_f_abs(mad_fixed_t); mad_fixed_t mad_f_div(mad_fixed_t, mad_fixed_t); Can anybodu help me? Thanks, Karthika Lakshmi. __________________________________________________________ Yahoo! India Answers: Share what you know. Learn something new http://in.answers.yahoo.com/

1 0

Synthesis filter bank in LIBMAD
by Karthika 28 Mar '07

28 Mar '07

Helloo, I am trying to understand the synthesis filter bank in the LIBMAD. I could not understand in what order the D coefficients are used to obtain the PCM samples. Also,half of these coefficients have some relation to the other half. Then, why all the coefficeints are being used in D.dat file? What is the significance of even and odd pointers? How is the windowing operation between U vector and D vector taking place? Also, I would like to know if we can further optimize the LIBMAD source code. For e.g, by using Cooley-Tukey algorithm for the calculation of fastdct() and dct32() . Could anyone suggest any further optimization techniques for porting LIBMAD on an ARM processor? Any help will be greatly appreciated. Thanks and Regards, Karthika Lakshmi. __________________________________________________________ Yahoo! India Answers: Share what you know. Learn something new http://in.answers.yahoo.com/

1 0

Help :)
by Khalid Aallouche 09 Dec '06

09 Dec '06

Hi all, I wanted to decode an MP3 file in order to read it. But I'm novice and there is so much file...Is someone can help to create a basic MP3 player (console application:user enters where the MP3 is, and after read the valid MP3 file) Thank you very much Khalid

2 4

madplay vs. mpg123
by Aaron 05 Dec '06

05 Dec '06

I ran more tests. madplay is fine on Mac. I used both madplay and mpg123 to decompress a file to wav. The wav sounds the same on both outputs. It sounds fine from aplay. It sounds bad (again) from audacity. It seems that on this machine, different programs/device drivers yield very different results. Any ideas what is different between these programs? (which drivers to they use... /dev/dsp? some alsa driver?) Perhaps there is some ioctl or something that isn't being done properly for my card on some programs... aaron

1 0

Playing Internet Streams with Madplay
by Mark Kane 12 Oct '06

12 Oct '06

Hi everyone. This may be a stupid question, but I've read through the madplay man page and online documentation several times and I cannot get an MP3 Internet radio station (SHOUTcast) to play with madplay. Every time I try on the command line, I get: ------------------------------------------------------ [mixx941@amd64:~]% madplay http://stream.com:8000 MPEG Audio Decoder 0.15.2 (beta) - Copyright (C) 2000-2004 Robert Leslie et al. http://stream.com:8000: No such file or directory ------------------------------------------------------ I've tried with and without the trailing slash on the URL, with/without quotes on the URL, and adding the "listen.pls" at the end. Still the same. Tried downloading the .pls and playing it from the file, although that gives this: ------------------------------------------------------ [mixx941@amd64:~]% madplay listen.pls MPEG Audio Decoder 0.15.2 (beta) - Copyright (C) 2000-2004 Robert Leslie et al. error: frame 0: lost synchronization 0 frames decoded (0:00:00.0), -inf dB peak amplitude, 0 clipped samples [mixx941@amd64:~]% ------------------------------------------------------ What am I doing wrong? Thanks in advance. -Mark madplay-0.15.2b -- Internet Radio: Party107 (Trance/Electronic) - http://www.party107.com Rock 101.9 The Edge (Rock) - http://www.rock1019.net IRC: MIXXnet IRC Network - irc.mixxnet.net (Nick: MIXX941)

3 3

Decoding time of MAD
by benix samuel 12 Oct '06

12 Oct '06

Hi everyone , I am using MAD decoder. It takes different time to decode two different frames of same header information and frame length. Is that MAD decoding time even depends on the data in the frame or only on the frame size. Benix

2 1

Where the hell is definition of struct id3_file????
by tj 29 Sep '06

29 Sep '06

In trying to learn how to use libid3, since there sems to be no documentatio. I am looking at soure trying to figure out how to use it. The first problem is the practically every call uses a pointer to a "struct id3_file" . Now, the problem is that there is no definition for id3_file structure in any .h file. I finally found it in file.c, a source file. How the hell are you supposed to use it in your app when the prototype is in a package source file? Seems that something is really broken here. tj

3 4

Madplay & Psion 5 MX: works 95% :-)
by Michael Fritscher 11 Sep '06

11 Sep '06

Hi, first of all: Thanks for the great program :-) madplay works ca. 95% on the psion 5 mx: it would need ca. 5-10% more power... It's a 36,8 Mhz ARM, the sound chip can do 8kHz/16 bit. I used the parameter --downscale, which scales 44.1 kHz mp3s down to 22.1 kHz, which helps much. But ideal would be a --downscale4 or so, which would scale it down to 11.05 kHz... How can I add this? I don't find the location in the code :-( Thanks, Michael Fritscher

1 0

← Newer
1
2
3
4
5
6
7
...
31
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

mad-user