mad-user

mad-user@lists.mars.org

303 discussions

Can't configure libid3tag form arm processor
by tj 08 Jun '04

08 Jun '04

I am trying to configure libid3tag.0.15.1b for the arm processor. But it keeps failing on zlib.h. I run ./configure --host=arm and get: checking assert.h usability... yes checking assert.h presence... yes checking for assert.h... yes checking for unistd.h... (cached) yes checking zlib.h usability... no checking zlib.h presence... no checking for zlib.h... no configure: error: zlib.h was not found *** You must first install zlib (libz) before you can build this package. *** If zlib is already installed, you may need to use the CPPFLAGS *** environment variable to specify its installed location, e.g. -I<dir>. I check /usr/local/arm/2.95.3/arm-linux/include and there is zlib.h It finds assert.h, whcih is in the same directory, so why not zlib.h? tj

2 1

Some make problems
by Ming Chi Tsai 05 Jun '04

05 Jun '04

Hi: I have a project that port madplay into embedded system(CPU:ARM, OS:uclinux). I know madplay can be build on uclinux using uclibc and arm cpu using arm-linux-gcc respectively. But, when I port madplay to embedded system with ARM and uclinux using arm-elf-gcc, I encountered some problems. The following is my make step: I use cygwin and arm-elf-gcc to build my project. export CPPFLAGS='-I/usr/local/include/' export LDFLAGS='-I/usr/local/lib/' $cd zlib-1.1.4 modify configure AR=$(AR-"ar rc") ---> AR="arm-elf-ar rc" RANLIB=$(RANLIB-"ranlib") ---> RANLIB=arm-elf-ranlib $./configure ---------------->down $cd libid3tag-0.15.1b $./configure CC=arm-elf-gcc --host=arm-elf --build=arm $make $make install ---------------->down $cd libmad-0.15.1b $./configure CC=arm-elf-gcc --host=arm-elf --build=arm $make $make install ---------------->down $cd madplay-0.15.2b $./configure CC=arm-elf-gcc --host=arm-elf --build=arm ---------------->error, because it can not find libmad and libid3tag. But I am sure the lib path is correct. Where am I wrong with the configure setting?? Whether madplay can't be ported to embedded system with ARM and uclinux or I should use anyother corse compiler. thanks for any reply. Tsaimc

2 4

The madplay can't play mp3.
by kobi.yang＠billionton.com.tw 19 May '04

19 May '04

I have three mp3 songs and the madplay can't play these songs. Maybe are mp3 itself problems but i can play them in the windows media player. I don't know the reason and i hope to solve this problem. You can download mp3 songs below. Thanks for help. IP: 203.204.108.161 username: test password: 1234

1 0

ID3v2 tags
by Alexey Panasenko 13 May '04

13 May '04

Hello, All @ mad-user list I wonder why WinAmp MAD plugin does not support ID3v2 tags, displaying and extracting info only from ID3v1. Is it planned to implement ID3v2 in next versions? P.S. I'm currently using ver. 0.14.2beta P.P.S. Looks like now MAD plugin development is frozen, or goes very slow... Am I right? Thanks. -- Regards, Alexey mailto:morgen_stern@mail.ru n.p: PLAYING / Guns N' Roses - Don't Cry

1 0

hi
by rob＠mars.org 24 Apr '04

24 Apr '04

that is bad

1 0

*.pc files
by Pash-man 16 Apr '04

16 Apr '04

Hi all! Why not created files mad.pc and libmad.pc after compiling? I have compiled libmad-0.15.0b. -- Fri Apr 16 14:37:44 UTC 2004

1 0

dB gain --> command-line volume switch?
by Ert 05 Mar '04

05 Mar '04

Hiya. This isn't really a MAD question, but it was suggested to me to try this list: I'm trying to implement some support for the output of the 'normalize' package in my mp3 player of choice, but ran into the problem that it doesn't seem that either mpg123 or mpg321 currently support the RVA2 volume adjustment tag in ID3v2.4 tags. So I wrote a little routine in the jukebox wrapper program I'm using ('Tunez') to pull out normalize's backwards-compatible ID3v2.3 "XRVA" tag data. Practical upshot is that before I call mpg321 I know that I want my file to be played, say, 5 dB louder or 10 dB quieter, but don't know how to translate that into the " -gain " argument's 0-100 scale on mpg123 or mpg321. I could figure this out by trial and error, but was hoping there might be a more definitive conversion. Anyone have any thoughts? Thanks! - Ert Dredge

2 2

madplay 0.15.2b released
by Rob Leslie 23 Feb '04

23 Feb '04

Aleksander Korzynski pointed out to me the recent LAME heresy with respect to Replay Gain: rather than using the 83 dB SPL reference specified by the Replay Gain proposed standard, LAME uses a reference of 89 dB as of version 3.95.1. Combined with the default pre-amp gain of +6 dB implemented in madplay, this often results in an over-amplified signal and clipping when Replay Gain is enabled. I've just released version 0.15.2b of madplay that compensates for this problem: ftp://ftp.mars.org/pub/mpeg/madplay-0.15.2b.tar.gz Cheers, -- Rob Leslie rob(a)mars.org

1 0

a patch for using the last alsa
by Florin Braescu 19 Feb '04

19 Feb '04

Hi everybody, I am a user of the source based Lunar Linux distro (www.lunar-linux.org). This distro contains the mad stuff. In order to use the alsa module (last version 1.0.2c) i use this simple patch. Please incorporate it in the package. Regards, Florin patch begins here --> --- ./audio_alsa.c.old 2003-05-30 09:26:17.000000000 +0300 +++ ./audio_alsa.c 2004-01-08 17:13:39.329443480 +0200 @@ -27,7 +27,11 @@ #include "global.h" #include <errno.h> -#include <sys/asoundlib.h> + +#define ALSA_PCM_OLD_HW_PARAMS_API +#define ALSA_PCM_OLD_SW_PARAMS_API +#include <alsa/asoundlib.h> + #include <mad.h> #include "audio.h" <-- and ends here. __________________________________ Do you Yahoo!? Yahoo! Mail SpamGuard - Read only the mail you want. http://antispam.yahoo.com/tools

1 0

MAD suite 0.15.1b released
by Rob Leslie 18 Feb '04

18 Feb '04

MAD 0.15.1b is now available. Here is a summary of the important changes: libmad - New Layer III IMDCT routine based on Szu-Wei Lee's fast algorithm. - Improved robustness of Layer II bitrate/mode combinations. - Other improved portability and robustness. libid3tag - New id3_field_gettextencoding() API routine. - Other slightly improved robustness. madplay - New Replay Gain support (-G, --replay-gain). - Tags can now be shown without decoding any audio (-T, --show-tags-only). - New support for reading and displaying encoder tag information written by e.g. lame(1). For complete details, see the CHANGES file in each package as well as the updated man page for madplay(1). You will find the new releases here: ftp://ftp.mars.org/pub/mpeg/ Enjoy, -- Rob Leslie rob(a)mars.org

3 2

← Newer
1
...
6
7
8
9
10
11
12
...
31
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

mad-user